Product Filters
All Tepid Water Delivery Products
6 Products found
Therm-O-Mix® Tepid Water Delivery System
The thermostatically controlled Therm-O-Mix® Station uses existing plant steam and cold water supplies to provide ...
- Self-Operating – no external power source required
- On-Demand Tepid Water - provides 3 to 25 GPM of 80°F water when the emergency fixture is activated
- Redundant Mechanical Temperature Controls – Regulate steam flow, provide two-stage mixing, and protect against over-temperature conditions
View Product
ESS Emergency Shower Water Heater
The ESS is a factory-packaged electric tepid water heater designed to supply on-demand tempered water to emergency ...
- Supports OSHA and ANSI/ISEA Z358.1 Requirements – Provides tepid water for emergency shower and eyewash applications
- Self-Operating Temperature Control – Therm-O-Mix®/WWM mechanically regulates outlet temperature without external power or controls
- Over-Temperature Protection – Shuts off hot water if cold-water pressure is lost or mixed-water temperature exceeds the operating range
- Emergency Flow Capability – Provides up to 23 GPM of tepid water for 15 minutes to support simultaneous operation of a safety shower and eye/face wash fixture
View Product
HAT/FP Freeze Protection Valve
The HAT/FP is a self-actuating freeze protection valve designed to protect water resupply lines from freezing. This thermostatic valve controls flow ...
- Self-Actuating Operation – Requires no external power, sensors, or controls
- Ambient or Fluid Sensing – Configurations available to respond to surrounding air or water temperature
- Water Conservation - Discharges only the water required for freeze protection
View Product
IC/FP Freeze Protection Valve
The IC/FP is a self-actuating freeze protection valve that responds directly to water temperature to protect piping ...
- Self-Actuating Operation – Requires no external power, sensors, or controls
- Water-Temperature Sensing – Continuously wetted thermal actuator responds directly to water temperature rather than ambient conditions
- Fast Temperature Response – Thermal actuator responds quickly to changes in water temperature to open and close the valve
View Product
HAT/SP Scald Protection Valve
The HAT/SP is a self-operating scald protection valve that automatically bleeds overheated water from safety shower, facewash, or eyewash piping to ...
- Self-Actuating Operation – Requires no external power, sensors, or controls
- Water Conservation - Discharges only the water required for scald protection
- Emergency Equipment Protection – Supports ANSI/ISEA Z358.1 water temperature requirements
View Product
IC/SP Scald Protection Valve
The IC/SP scald protection valve responds directly to water temperature, automatically discharging overheated water ...
- Self-Actuating Operation – Requires no external power, sensors, or controls
- ANSI Z358.1 Compliance – Temperature settings up to 105°F meet ANSI Z358.1 standards for emergency safety equipment
- Water-Temperature Sensing – Continuously wetted thermal actuator responds directly to water temperature rather than ambient conditions
View Product